Skip to content

General#

  • Add remesher or triangluate into your cloth mesh
  • Edge Fracture: to add random pattern of tears
  • Unwanted bounciness: Reduce Max Acceleration
  • Attach To Geo: Use Rest Length Scale to 0.1 to snap things really close to the geo
  • Compression Stiffness: If you set Thickness to 0.001, then increase Compression Stiffness to 100,000 to accommodate and to avoid folds smoothing out
  • Constraint Iterations: Higher resolution cloth means you need higher constraint iterations
  • Bend Plasticity: allows cloth to update rest length on its bend constraints as it deforms. Useful for denim or heavy fabrics

Settings#

  • Chiffon/Silk
  • Cloth mesh edge length: 0.01 (remesh to this)
  • Bend Stiffness: .0001
  • Thickness: 0.001
  • Rest Length: 0.94
  • Compression Stiffness: 100,000
  • Denim:
  • Cloth mesh edge length: 0.01 (remesh to this)
  • Bend Stiffness: 1
  • Thickness: 0.001
  • Rest Length: 0.94
  • Compression Stiffness: 100,000
  • Bend Plasticity 
    • Low: 0.005
    • High: 100
    • Hardening: 10
  • Leather
  • Cloth mesh edge length: 0.01 (remesh to this)
  • Bend Stiffness: 1
  • Thickness: 0.001
  • Rest Length: 0.94
  • Compression Stiffness: 10,000

Last update: November 14, 2019